SANlight STIXX 2 160 W LED driver with ribbed aluminium housing, black connection cables and blue-black electrical connector

Close-up of SANlight STIXX 2 160 W LED driver showing three-pin connector, blue connector housing and black power cable

SANlight STIXX 2 LED Driver Set 160 W

Data sheet / description

The SANlight STIXX 2 LED Driver Set offers a maximum output of 160 W for STIXX 2-60. The external LED driver is rated IP65 and supports an optional SANlight M-Dimmer or BT-Dimmer.

SANlight STIXX 2 LED Driver Set 160 W – Product data
Brand	SANlight
Model	STIXX 2 LED Driver 160 W
Type	External LED driver
Manufacturer part number	AI5100
Maximum output power	160 W
Compatibility	STIXX 2-60; only identical lights on a shared driver
Ingress protection rating	IP65
Dimensions (L × W × H)	231 × 90 × 41.5 mm
Weight	1.6 kg
Dimming	Optional with SANlight M-Dimmer or BT-Dimmer

Product number

STIXX 2-LED-DS-160W

Manufacturer

sanLight

SANlight GmbH & SLT GmbH
Montafonerstrasse 14
6780 Schruns

Austria

support@sanlight.com

www.sanlight.com

Weight

1.60 kg

79.90 €

(0)

Leave a review!

Recommend to a friend

Print product page

Product description

SANlight STIXX 2 LED driver 160 W with connecting cables

SANlight STIXX 2 LED Driver Set 160 W

The SANlight STIXX 2 LED Driver Set 160 W is the external power supply for lights in the STIXX 2-60 model series. It suits the series’ modular design and is the appropriate starting point when selecting a power supply for these lights.

For a well-matched system, plan the driver and lights together. The exact model series and desired operating power are the deciding factors. This helps establish which combination suits your installation before assembly begins.

Designed for STIXX 2-60

This driver is designed for STIXX 2-60. Lights sharing a power supply must be identical. Check the model designation of each light before planning the wiring; belonging to the STIXX series alone is not sufficient for selection.

If you want to extend an existing installation, start with an overview of the lights in use. Clearly matching the driver to the model series simplifies planning and makes it easier to identify which lights share a power supply later.

160 W and automatic power adjustment

The maximum output power is 160 W. Smart Driver Technology adapts operation to the connected modules. If the driver has sufficient power for their combined rated power, the modules can operate at rated power within an approved combination.

If the total power of the connected modules exceeds this level, the available power is shared: the lights then operate at reduced power. Connecting more lights therefore does not automatically mean more total power. Plan the combination according to your installation’s lighting needs.

Optional light output adjustment

An optional SANlight M-Dimmer or BT-Dimmer can be used at the blue connector. Dimming adds a way to adjust light output alongside the choice of driver and light combination.

When planning, consider whether you want a fixed setting or to adjust the lighting later. This decision helps you choose an optional dimmer. Treat the driver and dimming accessories as separate elements of your planning.

Installation step by step

With dimensions of 231 × 90 × 41.5 mm and a weight of 1.6 kg, you can account for the driver in your installation plan. Choose a position where you can reach the connectors and route the cables neatly. Also allow space for the plug connections.

Prepare the wiring with the mains power disconnected. Use approved components and follow the connection sequence in the SANlight operating instructions. Checking the complete connection before switching on makes commissioning easier.

Connect the STIXX 2-60 to the unpowered driver using approved connecting cables.
Seal open DC connections with the specified end plug and check all connections.
Only then connect the mains cable. Follow the reverse sequence when disconnecting.

Protection and careful handling

The driver is rated IP65. However, the mains-side connection is not waterproof and must be protected from moisture. Account for this when positioning it; the driver’s protection rating does not replace suitable protection for the mains connection.

Inspect cables and plugs for visible damage before use. Disconnect the power before working on connections and do not use damaged components. Repairs should be carried out by the manufacturer or a specialist service appointed by them.

Technical specifications

Brand	SANlight
Model	STIXX 2 LED Driver 160 W
Type	External LED driver
Manufacturer part number	AI5100
Maximum output power	160 W
Compatibility	STIXX 2-60; only identical lights on a shared driver
Ingress protection rating	IP65
Dimensions (L × W × H)	231 × 90 × 41.5 mm
Weight	1.6 kg
Dimming	Optional with SANlight M-Dimmer or BT-Dimmer

Why choose this STIXX driver?

For an installation using STIXX 2-60, this 160 W variant provides a matching power supply with automatic power adjustment and optional dimming.

It is a sensible choice if you select your system components according to model series and power. The combination approved by SANlight remains the deciding factor.