growRACK 1.0, 28cm

Data sheet / description

growRACK 1.0 is a stable, lightweight aluminium stand for growTABLE 1.0. Adjustable feet support levelling and drainage. Available for pre-order in two heights, exclusively for in-store collection.

growRACK 1.0 – PRODUCT DETAILS
Product Type	Aluminium support stand
Compatibility	growTABLE 1.0
Profile	25 × 25 mm aluminium, 1.5 mm wall thickness
Connectors	Glass-fibre-reinforced plastic
Feet	Threaded and adjustable
Low Version	93.5 × 93.5 × 28 cm / 4.5 kg
Tall Version	93.5 × 93.5 × 58 cm / 5.5 kg
Delivery Condition	Disassembled
Availability	Available for pre-order
Collection	In-store collection only

Product number	100711
Manufacturer	growTOOL company Fritz-Schreiter-Str. 31 01259 Dresden Germany info@growtool.net www.growtool.com
Weight	5.00 kg

94.90 €

49.90 €

(0)

Leave a review!

Recommend to a friend

Print product page

Product description

Stable aluminium support stand

growRACK 1.0 – professional support stand for the growTABLE 1.0 system

The growRACK 1.0 is a lightweight yet highly stable aluminium support stand designed specifically for the growTABLE 1.0 system. It raises the growing table for easier access and allows the required inclination to be created with its adjustable feet.

Corrosion-resistant aluminium profiles, high-strength connectors and a straightforward assembly system provide a dependable long-term solution. The growRACK 1.0 is available in two different heights, allowing the system to be adapted to the available space and preferred working height.

Stable aluminium structure

The 25 × 25 mm aluminium profiles with a wall thickness of 1.5 mm provide high stability while keeping the overall weight of the stand low.

Adjustable threaded feet

Fine adjustment of the feet helps compensate for uneven flooring and allows a gentle slope to be created for the controlled drainage of excess water.

Two available heights

The low 28 cm and tall 58 cm versions offer different working heights, while both variants have a footprint of 93.5 × 93.5 cm.

Designed specifically for growTABLE 1.0

The dimensions of the growRACK 1.0 are matched to the growTABLE 1.0 growing table. The stand provides stable support and raises the table above floor level, helping create a tidier and more accessible working area. The elevated system can also leave additional space beneath the table for suitable accessories, drainage components or other technical equipment.

Two selectable heights allow the system to adapt to different rooms and workflows. The lower version provides a more compact installation, while the taller model offers easier access and greater clearance beneath the table.

Adjustable inclination for effective drainage

The threaded feet of the growRACK 1.0 are not only intended for fine adjustment of the working height. They can also compensate for minor irregularities in the floor, allowing the stand to be positioned securely without rocking.

Setting the feet to slightly different heights allows a gentle inclination to be created. This can help excess water on the growTABLE surface move in the desired direction and leave through the connected drainage point. The adjustable design therefore contributes to both stability and practical system operation.

Lightweight, corrosion-resistant and durable

The main structural components of the stand are made from aluminium. This material provides suitable rigidity at a low weight and performs well in environments where durability and resistance to moisture are important. The 25 × 25 mm profiles with a 1.5 mm wall thickness create a stable, professional foundation.

The profiles are joined using high-strength, glass-fibre-reinforced plastic connectors. The accurately fitting components create a rigid structure while allowing the stand to be supplied flat-packed in a space-saving format.

Straightforward assembly

The growRACK 1.0 is supplied disassembled. The aluminium profiles are joined using the glass-fibre-reinforced plastic connectors. A rubber mallet is recommended for assembly, allowing the profiles to be fitted firmly into place without unnecessarily damaging their surface.

The connections should be assembled evenly and progressively. Once the complete structure has been built, the threaded feet can be used to establish a stable position and the required inclination. The finished stand can then accommodate the compatible growTABLE 1.0 table.

Two available versions

growRACK 1.0 – 28 cm

Assembled dimensions: 93.5 × 93.5 × 28 cm

Packed weight: 4.5 kg

growRACK 1.0 – 58 cm

Assembled dimensions: 93.5 × 93.5 × 58 cm

Packed weight: 5.5 kg

Key advantages of growRACK 1.0

Support stand designed specifically for the growTABLE 1.0 system
Lightweight, stable and corrosion-resistant aluminium structure
25 × 25 mm aluminium profiles with a 1.5 mm wall thickness
High-strength, glass-fibre-reinforced plastic connectors
Adjustable threaded feet for stable levelling
Option to create a gentle slope to support water drainage
Two available heights: 28 or 58 cm
Compact, flat-packed design
Simple assembly using a rubber mallet

growRACK 1.0 – Product Information
Product Type	Aluminium support stand
Compatibility	growTABLE 1.0
Profile Material	Corrosion-resistant aluminium
Profile Cross-Section	25 × 25 mm
Profile Wall Thickness	1.5 mm
Connectors	Glass-fibre-reinforced plastic
Feet	Threaded and adjustable
Low Version	93.5 × 93.5 × 28 cm / 4.5 kg
Tall Version	93.5 × 93.5 × 58 cm / 5.5 kg
Delivery Condition	Disassembled
Collection	In-store collection only

Important collection information

The growRACK 1.0 is available exclusively for in-store collection. Home delivery is not available for this product. Please select the personal collection option when placing your order.